BTYZZ - VN 6793 BLACK POLY PST

  • MSDS: BTYZZ
  • Manufacturer: FERRO CORP
  • Product Name: VN 6793 BLACK POLY PST
  • National Stock Number: 8010-00N048935
Product Identification

Product ID:VN 6793 BLACK POLY PST
MSDS Date:01/01/1993
FSC:8010
NIIN:00N048935
MSDS Number: BTYZZ

Responsible Party
FERRO CORP.
115 SKYLINE DR.
SOUTH PLAINFIELD, NJ 07080
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 908-756-1225

Cage: 7L111

Contractor
FERRO CORP.
SOUTH PLAINFIELD, NJ 07080 US

Telephone: 908-756-1225

Cage: 7L111

Ingredients

NON HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY CAUSE IRRIT. SKIN:RPTD OR
PRLNGD CONT MAY CAUSE REDDENING, ITCHING, & INFLAMM. MAY CAUSE
ALLERGIC REACTIONS ON SOME INDIVIDUALS. INHAL:MAY CAUSE RESP TRACT
IRRIT. INGEST:MAY CAUSE GASTROINTES TINAL IRRIT, NAUS, VOMIT, &
DIARR. CHRONIC:PRLNGD & RPTD SKIN CONTACT MAY CAUSE DERMATITIS
AND/OR ALLERGIC REACTION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:IMMED FLUSH W/LOTS OF WATER FOR AT LEAST 15 MINS,
OCCASIONALLY LIFTING UPPER & LOWER EYELIDS, & GET PROMPT MED ATTN.
SKIN:WASH CONTACTED AREA THORO W/SOAP & WATER. REMOVE & WASH
CONTAMD CLTHG BEF ORE REUSE. SEE DOCTOR IF IRRIT IS
PRESENT/PERSISTS. INGEST:IF SWALLOWED, CALL A DOCTOR IMMED! ONLY
INDUCE VOMIT AT INSTRUCTIONS OF DOCTOR. NEVER GIVE ANYTHING BY
MOUTH TO UNCON PERSON! (SUPDAT)

Fire Fighting

Flash Point Method:TOC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TREAT AS OIL FIRE. WATER MAY BE USED TO
KEEP FIRE-EXPOSED CONTAINERS COOL UNTIL FIRE IS OUT.

Accidental Release

Spill Release Procedures:VENT AREA & MAINTAIN VENT. USE ALL DESCRIBED
PROT MEASURES & EQUIP. USE ABSORBANT MATL, SUCH AS CLAY OR SAND, TO
COLLECT & CONTAIN FOR SALVAGE & DISPOSAL. WASH CONTAMINATED AREA
WITH SOAPY WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT, SPARKS & OPEN
FLAMES. DO NOT CUT, PUNCTURE, OR WELD ON OR NEAR THIS CNTNR. DO NOT
STORE NEAR FOOD OR FEED.
Other Precautions:STORE IN COOL, DRY AREA IN CLSD CNTNRS AWAY FROM
INCOMPATIBLE MATLS. SINCE EMPTIED CNTNRS RETAIN PROD RESIDUES (VAP,
LIQ, OR SOLID), ALL HAZARD PRECAUTIONS LISTED IN THE MSDS MUST BE
OBSERVED.

Exposure Controls

Respiratory Protection:IN ABSENCE OF PROPER VENT USE NIOSH/MSHA
APPROVED RESPIRATOR.
Ventilation:VENT TO MAINTAIN EXPOSURE BELOW PUBLISHED EXPOSURE LIMITS.
USE EXPLOSION PROOF MOTORS & WIRING.
Protective Gloves:USE NEW, IMPERVIOUS (RUBBER, (SUPDAT)
Eye Protection:CHEM SFTY GOGG & FULL FACESHLD.(SUPDAT)
Other Protective Equipment:SAFETY SHOWERS & EYE WASH STATIONS WITHIN 10
SECONDS OF WORK STATION. WHERE SPLASH CAN OCCUR, USE AN APRON.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRST AID PROC:INHAL:REMOVE VICTIM FROM EXPOS TO WELL VENT AREA. MAKE
COMFORTABLY WARM BUT NOT HOT. USE ARTF RESP/OXYG AS REQD. SEE
DOCTOR IF IRRIT IS PRESENT/PERSISTS. PROT GLOVES:NITRILE)GLOVES.
REP LACE EVERY 4 HRS/AS OFTEN AS NEED TO MAINTAIN PROT. EYE
PROT:WHEN SANDING CURED PROD USE DUST-TIGHT GOGG.

Chemical Properties

HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:1.1 (H*20=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:LIQUID WITH RESIN ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG BASES, STRONG ACIDS, & OTHER OXIDIZING AGENTS.
Stability Condition to Avoid:CONSIDERED STABLE AT ROOM TEMPERATURE.
Hazardous Decomposition Products:OXIDES OF CARBON; INCOMPLETELY BURNED
HYDROCARBONS.

Disposal

Waste Disposal Methods:PACKAGE IN D.O.T. APPRVD CNTNRS & TRANSPORT TO
AN EPA APPRVD TREATMENT, STORAGE, & DISPOSAL (TSD) FACILITY.
DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.